- Multi-function – a lot of functions to meet your different riding needs: SPD CURRENT SPEED, ODO ODOMETER, DST TRIP DISTANCE, MAX MAXIMUM SPEED, AVS AVERAGE SPEED, TM TRIP TIME, CLK CLOCK, Scan, “+””-“COMPARATOR, etc.
- The large LCD display guarantees you can read your statistics easily. Pls note the slight rattle sound from device is normal phenomenon, which results from the design of automatic function.
- Built-in steel ball switch that will shake when receiving signals, computer will be automatic awake from sleeping mode. In the mean time you may hear slight rattle from the device. Its common phenomenon as steel ball is working.
- Wireless and waterproof design makes it more convenient and durable. Small size and light weight, measuring both speed, distance, and riding time, functions both as a bicycle speedometer and odometer, three numbers which no serious bicyclist or fitness fanatic wants to go without knowing.
- Suitable to all types of bicycles. Often there’s no limits of your wheel size, but pls note the distance between sensor and receiver shouldn’t be more than 60cm, transmitter and magnet not more than 3mm, or it may not get the signal
1. Waterproof and seismic effectively block the raindrops while riding.
2. Ride data under control, easy to adjust the riding state, riding and rest.
3. Wireless controlment of the computer
4. Display with backlight function to provide clear data day and night.
5. Temperature display function allows the driver to keep abreast of changes in temperature, adjust the dress.
6. Installed simply without tools.
How to install:
1. Remove the battery cover from the bottom of the computer by using a coin, install one CR2032 battery.
2. Secure the base of computer with two cable ties.
3. Make sure that the back of the point of contact is fully consistent with the bicycle computer. 4. Attach the sensor transmitter to the left fork blade, the distance between computer and the sensor cannot exceed 23.62″.
5. Unscrew the screw head, the head is fixed on the radiation strip.
6. Adjust the sensor and the head, so that the two distance control in less than 4mm. The closer the better.
1. Not long soaking, especially in case of bad weather, waterproof measures such as plastic wraps may be prepared.
2. The method of detecting a cycling computer: Inserted the display into the base, then sensor in one hand, the other holding the magnet close to the upper or lower end of the sensor slide back and forth, the data shows which means it is normal.
…. Read More ….
Buy with confidence from Amazon